An Amateur Radio Blog by DX Engineering 
Editor’s Note: Every month, DX Engineering features QSL cards from our team members’ personal collections. To highlight upcoming DXpeditions, we’ll be displaying a few of our favorite cards along with details […]
Before we get to the nitty gritty in Part 5 of our series on Choosing the Right Coaxial Cable, we feel it’s important to highlight one of the most critical […]
The next time you install an F-connector to the end of a 75-ohm RG-6/U or RG-59/U coaxial cable, why not take a moment to remember the person who made this […]
There are very good reasons why you should use the 160 and 80 meter bands. They are usually the least likely to fail under adverse propagation conditions. In times of […]
Like so many products made for the amateur radio community, the handy devices from Paradan Radio spring from the fertile minds of active operators who know a thing or three […]
As we present Part 4 in our series on Choosing the Right Coaxial Cable, you’ve likely come to understand from earlier posts that shopping for the ideal coax is not […]
The 2021 YOTA (Youth on the Air) Camp held July 11-16 is in the books— and what a week it was for the 23 young hams from around the U.S. […]
In Part 3 of our series on Choosing the Right Coaxial Cable, we turn to one of DX Engineering’s most popular offerings: premium 400MAX Low-Loss 5o-ohm Coaxial Cable, or, in […]
Yes, you can take it with you. Today’s smaller transceivers and accessories allow you to operate from anywhere, whether it’s a cabin at the lake, a weekend at Uncle Joe’s, […]
As any ham knows, the hobby that occupies so many hours of our time has never been a stagnant pursuit. When Heraclitus famously stated, “No one steps in the same […]
