Vibroplex, which first manufactured and sold its signature Morse code “bug” key back in 1904, is the longest continually operating ham radio equipment provider on the planet, but that doesn’t mean the venerable company doesn’t have more than a few new tricks up its well-worn, rolled-up sleeves.
DX Engineering’s Rod Ehrhart, K8RR, caught up with Scott Robbins, W4PA, Vibroplex’s owner since 2009, at Dayton Hamvention 2024 to discuss the mAT-TUNER line of automatic antenna tuners, which the Knoxville, Tennessee-based company has distributed in the U.S. since 2019. Watch the video below:
Scott, W4PA, highlights two new mAT-TUNER offerings—mAT-50 Automatic Antenna Tuner and Coupler Packages and the 1500PRO Automatic Antenna Tuner, both available along with the entire mAT-TUNER lineup at DXEngineering.com.
The multipurpose, 1.8-54 MHz mAT-50 Automatic Antenna Tuner comes with either an Icom, Yaesu, or Kenwood coupler and corresponding control cable. This remote tuner has the capability of matching a variety of impedances and antennas including long-wires, dipoles, verticals, Yagis, whips, and virtually any coax-fed antenna. It features a maximum input power of 120W SSB/60W Digital.
Install the sturdy, weather-resistant tuner outside near the antenna. Then install the coupler inside near the transceiver to provide power for the tuner and control its operation. The tuner does not require a control cable between the remote tuner and coupler, making installation simple. The only required connection between the antenna tuner and coupler is one 50-ohm coaxial cable. Advanced technology employed in the tuner delivers stable performance and excellent anti-interference capabilities for convenient one-key tuning.
The mAT-50 can also be used as a universal tuner for all transceivers if a mAT-50-Y or mAT-50-M coupler is connected to an external DC power supply (not included) and a control cable is not installed. You can then operate the tuner manually.
The mAT-1500PRO Automatic Antenna Tuner is an upgraded version of the original mAT-1500 tuner. Improvements include reduced weight, high- quality housing, and additional interfaces for Yaesu, Icom, and Kenwood transceivers and their corresponding operating modes. This allows the tuner to be controlled directly from the transceiver, reducing the need for manual operation.
In addition, two antennas can be connected simultaneously, and the corresponding buttons for switching (in receive mode) are placed on the front panel for easy access. Other features include:
- Designed for modern transceivers with a frequency range of 1.8-54 MHz
- Rated for up to 1,500W SSB/800W Digital
- 16,000 memory locations
- Fast tuning—found values for a frequency are stored in the memory, enabling adjustments as quick as 100ms
- Loop-through of the PTT line makes it possible to loop in the power amplifier behind the tuner. The tuner interrupts the PTT line to the power amplifier during the tuning process. This avoids tuning with high power, greatly reducing the possibility of damaging the tuner relays.
- 6 to 1,000 ohms tuning range, which corresponds to an SWR range maximum of 10:1. This allows it to match all coax-fed antennas such as a G5RV with a balun at the transition between two-wire ladder line and coax cable, but also a wideband vertical antenna designed for the rated power.
See all mAT-TUNER automatic antenna tuners and accessories at DXEngineering.com, including the MAT-Y200 for Yaesu transceivers, the MAT-705PLUS for the Icom IC-705, and the MAT-180H for select Icom and Kenwood transceivers.
